歡迎來到四機數控機床有限公司官網!
0531-88681424簡體中文ENGLISH
網站首頁四機數控產品中心125系列通用磨床 > 高速半自動外圓磨床
  • 商品名稱: 高速半自動外圓磨床
  • 產品編號: 0707
  • 產品型號: MSB1312A
  • 瀏覽次數: 10

機床特點:

★本機床適用于各種中小型零件的外圓柱面,外圓錐面的高效磨削。

★機床砂輪架、頭架、工作臺可以轉動一定角度,且工作臺、砂輪架除液壓驅動外,還可手動。

冷卻系統采用磁性分離器排屑,并能實現切入半自動定程循環磨削,以適應批量特別是大批量生產

★ 本機床可采用頂尖、卡盤或彈簧卡頭裝夾工件,

技術規格:TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

頂尖距Distance between centers                                                     270 mm

磨削直徑Diameter to be ground                                                   φ5-φ125mm

最大磨削長度Max. length to be ground                                               250 mm                                                       

磨削孔徑Aperture to be ground                                                     φ10-φ40

最大磨削孔深Max. depth to be ground                                                  50 mm

工作臺回轉角度Table rotation angle                                                   ± 10°

頭架的回轉角度Rotation angle of headstock                    順時針:10°  逆時針:90°

砂輪架回轉角度Rotation angle of grinding wheel rack                                   ± 180°

最大工件重量Max. weigth of workpiece                                                10kg

砂輪尺寸Dimensionof Max. grinding wheel                              φ300×(20-40)×φ127mm

砂輪線速度Linear speed of grinding wheel                                            ≤50m/s                                                 

砂輪架電機功率Motor power of grinding wheel rack                                     2.2kw

機床外形尺寸Outline dimension of machine tool                     

1550×1190×1300mm

 凈重  Net weight                                                                  1500 Kg

 毛重  Gross weight                                                               1600 Kg

  

             

 

 

 

工作精度:WORKING ACCURACY(磨削國家標準試磨件)

                                              

切入磨外圓圓度 :頂尖磨外圓           0.003 mm

                            夾磨外圓              0.005 mm

  

縱磨外圓圓度          0.003 mm

表面粗糙度       Ra0.32μm

 

 

 

 

 

 

平面布置圖

1. 主機高度1300mm

2. 機床應安裝在遠離震源的堅固基礎上,用機床底下的3塊墊鐵來調整安裝水平。用水平儀檢查機床的水平性。縱向≤0.04/1000,橫向≤0.04/1000,當機床調整完畢后,可加入必要的輔助墊鐵,注入混凝土固定

十分钟免费观看视频在线观看